CHIP QUIK logo
 
 
 
 
 
 
 
 
 
 
 
Product Description
 
EPS-H206NV1 24 inch 6 Outlet Metal Power Strip with Surge Protector
Product Name: EPS-H206NV1 24 inch 6 Outlet Metal Power Strip - Hardwired
Our Price: $26.98
Availability: In Stock
Product Number: EPS-H206NV1
 
Product Details
 
EPS-H206NV1 24 inch 6 Outlet Metal Power Strip - Hardwired

    This hard wired type power strip is good for installation in your kitchen, cabinet and so on. It is not for normal wall outlets. There is no plug and power cord with this unit.

    Features
    • 2 ft (0.61m) Durable Metal Housing Power Strip
    • 6 Black US Standard Outlets, Vertical Outlet Orientation
    • Hard Wired without Power Cord for Mounting at Your Desired Location
    • 6 Easily Punched off Knockouts on Each Side - on Top, Both Sides, the Bottom Cover and Both Ends
    • Easy On/Off f Back Cover (only 2 screws)
    • Wires Readily Cut for Easier Removal and Faster Installation
    • Installation by professional electricians only (OR DANGER: Electric Shock)

    Specification

    Model #:

    EPS-H206NV1

    Description:

    24” 6 Outlet Hardwire Type Metal Power Strip

    Power Strip Measurement:

    24" x 1.575" x 1.417” (609mm x 40mm x 36mm) *

    Outlets:

    6

    Outlet Color:

    Black

    Outlet Orientation:

    Vertical

    Receptacle Type

    NEMA 5-15R

    Outlet Spacing

    3" or 79mm (center to center)

    Knockout Cord Exit:

    6 (Top, Bottom Cover, Both Sides & Both Ends)

    Voltage Input/Output:

    110-125V 60Hz

    Current Input:

    15A

    Full Load:

    1875VA

    On/Off Switch:

    N/A

    Circuit Breaker:

    N/A

    Surge Protection:

    N/A

    Indicator:

    N/A

    Noise Filter:

    EMI/RFI

    Mounting on Back:

    N/A

    Mounting Tabs:

    On both ends (5/8”) with butterfly holes (Click here )

    Mounting Brackets:

    N/A (order separately if needed)

    INSTALLATION PROCEDURE:
    Before installation, you will need to get a 3/4" wire clamp and 3 wire connectors from your local hardware or electric supply or home improvement store.
    Minimum tool required: A fine to medium fine philips screw driver


    • Turn off electricity in the house
    • Decide where to place this unit
    • Choose the right side for cord exit and mark on the knockout round section
    • Gently punch off the knockout round section chosen with a screw driver or other tool handy
    • Unscrew the cover off the back of the power strip
    • Install the 3/4" wire clamp you already have
    • Run the wires through the wire clamp
    • Match the color of the wires and connect them properly with terminal connectors
    • Tighten the wire clamp properly
    • Put back the cover
    • Mount the strip where you want it to be
    • Turn electricity back on

    WARNING:

    You must be an electrician or an electric engineer to do the installation work.


    Note
    :

    * For installation purpose: The length of the power strip does not include the mounting tabs at both ends; The width does not include the size of screws; The height does not include the receptacles.


    Important
    :

    This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.

    We also custom manufacture for our customers.

     


    .
 
 
 
Security Policy       Privacy Policy        Contact       Currency Exchange