This high quality power strip bar is ideal for use with various electric and electronic appliances, devices such as computers, audio and video equipment, power tools and instrument in the office building, in the garage at home, in the warehouse, factory, on the production line or manufacturing facilities. Better protection against power surge.
Features
-
3 ft (0.91m) durable steel housing Power Strip
-
9 US standard easily recognizable white (light grayish) Outlets on black Power Strip body
-
9 ft (2.74m) 14/3 AWG, SJT heavy duty Power Cord
-
On/Off Switch with 15Amp resettable Circuit Breaker
-
Surge protected up to 1824 Joules
-
Green LED Indicators for grounding and surge protection working conditions in the circuit
-
ETL (Conforms to UL Std. 1363 and CAN/CSA Std. C22.2 No. 14) approved and listed
-
Electrical ratings: 125V/15A/1875W
-
Mounting on back with additional mounting brackets
-
Ample space between Outlets for big and bulky Power Supplies
-
Solid and sturdy feel
-
Plug-in and play
Model #: |
EPS-3099BL |
Description: |
36 9 Outlet Metal Power Strip |
Power Strip Measurement: |
L36xW1.575xH1.417 (914x40x36mm) * |
Outlets: |
9 |
Outlet Color: |
White (light grayish) |
Outlet Orientation: |
Horizontal |
Plug / Receptacle Type |
5-15P / 5-15R |
Outlet Spacing: |
3¾" or 95mm (center to center) *
|
Power Cord: |
9' (2.74m) 14/3 AWG, SJT Heavy Duty |
Voltage Input/Output: |
110-125V 60Hz |
Current Input: |
15A |
Full Load: |
1875VA |
On/Off Switch: |
Yes (without light) |
Circuit Breaker: |
Resettable (built in switch) |
Surge Protection: |
Up to 1824 Joules |
Lines Protected: |
(L-N) (L-G) (N-G) |
Response time: |
Less than 5 nanosecond |
Noise Filter: |
EMI/RFI |
Mounting on Back: |
Yes (Click here to see) |
Mounting Tabs: |
N/A |
Mounting Brackets: |
2 x ¾ (19mm) Spring Clips (Click here ) |
Indicator: |
Green LED Grounding and Green LED Surge Protection |
Note :
* The measurement is approximate. The width of the power strip does not include the size of screws, and the height does not include the receptacles.
Important :
1. It is not advisable to use this unit on a GFI (or GFCI - Ground Fault Circuit Interrupters) Outlet (as shown below), as the Grounding Indicator in the circuit would likely trip the GFI, which would not automatically reset.
2. This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.
We also custom manufacture for our customers.
|
