|
Description
Solder Paste Sn63/Pb37 water-washable no-clean T4 Mesh in 6oz cartridge 500g.
Applications
Suitable for most Commercial and Industrial Applications with or without cleaning.* Suitable for Military, Aerospace, and Space applications, with cleaning, when using aqueous wash with appropriate saponification.* Our SMD4300 series of fluxes and solder pastes are our easiest to clean, and have been used in many military, aerospace, and space applications.
*Due to the wide range of applications and operating environments, customers should test this product in their specific application to ensure suitability.
Specifications
Alloy: Sn63/Pb37
Flux Type: Synthetic Water-Washable No-Clean
Flux Classification: REL0
Metal Content: 87% metal by weight.
Particle Size: T4 (20-38 microns)
Melting Point: 183C (361F)
Size: 6oz/500g cartridge
Shelf Life
Refrigerated >12 months, unrefrigerated >6 months
Stencil Life
>8 hours @ 20-50% RH 22-28C (72-82F)
>4 hours @ 50-70% RH 22-28C (72-82F)
Stencil Cleaning
Automated stencil cleaning systems for both stencil and misprinted boards. Manual cleaning using isopropyl alcohol (IPA).
Storage and Handling
Refrigerate at 3-8C (37-46F). Do not freeze. Allow 4 hours for solder paste to reach an operating temperature of 20-25C (68-77F) before use.
Transportation
This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life.
 WARNING! This product can expose you to Lead, which is known to the State of California to cause Cancer, Birth Defects, or other Reproductive Harm. For more information, go to: www.P65Warnings.ca.gov
Documents
Datasheet
MSDS Sheet
|
