|
Lead-Free / RoHS 3 Compliant / REACH Compliant
Description
Liquid Nano Coating Thinner in 500ml (740g) can
Product Highlights
Adheres to plastic, metal, glass, ceramic, PTFE, PCBs. RoHS, REACH, WEEE compliant. Cost effective alternative to traditional coatings. No VOCs. Repels oil and water. Easy to apply. Short processing times. Heat cure optional. Solder through repairable. Chemically resistant. Masking optional. Easily reworkable.
Product Uses
For thinning Chip Quik Liquid Nano Coating NANOCOAT200
Specifications
Chemistry: C6 fluoro-carbon
Density: 1.48 g/ml
Viscosity: >0.41 cP depending on polymer concentration
Application Options: Dipping, spraying, brushing, syringe-dispensing
Dry Time: 5-30 seconds
Cure Time: No cure required, optional room temperature for 24 hours or 10 minutes at 60C
Thickness: 0.1-1.0 um (depending on concentration and application method)
UV Tracer Present: No
Percent Polymer: 0% (Thinner)
Packaging: 500ml Can (740g net weight)
Concentration and Thickness Guide
Film thickness at 2% polymer: ~0.1um
Film thickness at 4% polymer: ~0.5um
Film thickness at 10% polymer: ~1.0um
Resistance to chemical and mechanical attack
The nano coating itself is electrically non-conductive. However, at 0.1um thickness, measurement probes are able to mechanically penetrate the coating. At 0.1um the coating is resistive to oil and water.
Shelf Life
>24 months
Storage and Handling
Store at room temperature 20-25C (68-77F).
Transportation
This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life.
Documents
Datasheet
MSDS Sheet
|
