Lead-Free / RoHS 3 Compliant / REACH Compliant
100% RTV Silicone
Can be Applied at Hot and Cold Temperatures
Withstands Extreme Cold and Extreme Heat
25% Joint Movement Capability
Resistant to Various Chemicals and Oils
Flexible, Durable, Non-Degrading
Withstands Moisture, Vibration, Abrasion
One-Component Moisture Cure
Sealing and Bonding Applications.
Industrial Manufacturing Applications.
Will bond to Glass, Metal, Ceramic, Most Paints and Most Plastics.
Surfaces should be clean and dry. Unscrew cap, cut the tip off. If tooling is required, do so within the first 10 minutes after dispensing. Apply the silicone to surfaces and remove the excess silicone after tooling with a dry clean cloth. Allow the silicone to cure completely. At room temperature, 25C (77F), and 50% relative humidity, the silicone will skin in 10 minutes and fully cure in 24 hours (1/8" bead). The silicone will reach its maximum adhesion in 7 days. Higher humidity accelerates curing.
Accelerating Curing Time
High humidity in combination with slightly elevated temperature will speed curing. Recommended Fast Cure Starting Point: Humidity of 95 to 100%, with temperature of 50 to 65C.
Meets and Exceeds: ASTM C920, TT-S-00230C, TT-S-001543A, MIL-46106 Type 1
VOC: VOC Compliant (<3%)
Operating Temperature Range (after curing): -46C to +204C (-50F to +400F)
Application Temperature Range: -37C to +65C (-35F to +150F)
Curing Time (at 21C (70F), 50% RH): 10 min (skin), 24 hours (full cure), 7 days (max adhesion)
Viscosity: 582 x10^3 mPas (cps) (Spindle 7, 4 RPM)
Shore A Hardness: 25
Tensile Strength: 264psi
Size: 20g (0.7oz) Squeeze Tube, for Precision Dispensing
Storage and Handling
Store refrigerated or at room temperature 3-25C (37-77F).
This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life.