Chip Quik
  Top » Catalog » Adhesive/Sealant (27) » NCS10G-20G My Account  |  Cart Contents  |  Checkout   |    
Search

Categories
Adhesive/Sealant (27)
  Chip Glue (2)
  Silicone Adhesive (16)
  Silicone Grease (2)
  Super Glue (7)
Aluminum Solder Paste (5)
ChipQuik Alloy (10)
Conductive Paint (3)
Flux - Liquid (10)
Flux - Paste (1)
Flux - Tacky Flux (19)
Flux Remover (9)
Polyimide Tape (13)
Potting Compound (3)
Solder Bar (12)
Solder Paste 2 Part Mix (4)
Solder Paste Cartridge (15)
Solder Paste Jars (26)
Solder Paste No Fridge (15)
Solder Paste Syringes (25)
Solder Ribbon (2)
Solder Shot (12)
Solder Spheres (42)
Solder Wick (3)
Solder Wire (132)
Solder/Desolder Kits (4)
Thermal Paste (6)
Tip Tinner/Cleaner (1)
Tools/Accessories (2154)
What's New? more
No-Clean Halogen-Free Tack Flux in a 10cc syringe w/plunger & tip
No-Clean Halogen-Free Tack Flux in a 10cc syringe w/plunger & tip
$16.95
Information
MSDS
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
Legal

Neutral Cure Silicone Adhesive Sealant (Grey) 20g Squeeze Tube

[Part Number: NCS10G-20G]
$3.95
USD
In Stock
Quantity:
100
Click to enlarge

Lead-Free / RoHS 3 Compliant / REACH Compliant
Product Highlights
Neutral Cure RTV Silicone
Bonds to a Wider Variety of Substances
Seals, Bonds, Encapsulates
Resistant to Various Chemicals and Oils
Non-Corrosive, Non-Conductive
Flexible, Durable, Non-Degrading
Withstands Moisture, Vibration, Abrasion

Common Uses
Protecting, Sealing and Insulating.
Bonding to Aluminum, Vinyl, Fiberglass, Ceramics, Brick, Mortar, Concrete, Glass, Granite, Marble, Metals, Wood, Plastic, Porcelain, PVC, Steel.
OEM Commercial and Industrial Manufacturing for Flexible Permanent Bonding and Sealing.

Instructions
Surfaces should be clean and dry. Unscrew cap, cut the tip off. If tooling is required, do so within the first 10 minutes after dispensing. Apply the silicone to surfaces and remove the excess silicone after tooling with a dry clean cloth. Allow the silicone to cure completely. At room temperature, 25C (77F), and 50% relative humidity, the silicone will skin in 10 minutes and fully cure in 24 hours (1/8" bead). The silicone will reach its maximum adhesion in 7 days. Higher humidity accelerates curing.

Specifications
Meets and Exceeds: ASTM C920, TT-S-00230C, TT-S-001543A, MIL-46106 Type 1
VOC: VOC Compliant (<3%), Low Odor
Operating Temperature Range: -57C to +204C (-70F to +400F)
Curing Time: 10 min (skin), 24 hours (full cure), 7 days (max adhesion)
Color: Grey
Size: 20g Squeeze Tube

Storage and Handling
Store refrigerated or at room temperature 3-25C (37-77F).

Shelf Life
>36 months

Transportation
This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life.

WARNING! This product can expose you to Carbon Black and Titanium Oxide, which are known to the State of California to cause Cancer, Birth Defects, or other Reproductive Harm. For more information, go to: www.P65Warnings.ca.gov. These materials are embedded in the product and are not available as respirable dusts. When used as intended or as supplied, the product will not pose hazards.

Documents

Datasheet
MSDS Sheet
Shopping Cart more
0 items
Shipping Estimate
Estimate for United States
US Mail$4.00
UPS Ground$10.00
Fedex Overnight$16.00

Copyright © 1994-2019 Chip Quik®
Contact Us