Chip Quik Jet Printing Solder Paste
Optimized for MYCRONIC MY600 and MY700 Jet Printers
Flux Type: Synthetic No-Clean
Flux Classification: ROL0
Metal Content: 85% metal by weight, vacuum mixed.
Particle Size: T5 (15-25 microns)
Melting Point: 183C (361F)
Size: 30cc/100g Syringe
Refrigerated >12 months, unrefrigerated >6 months
>8 hours @ 20-50% RH 22-28C (72-82F)
>4 hours @ 50-70% RH 22-28C (72-82F)
Automated stencil cleaning systems for both stencil and misprinted boards. Manual cleaning using isopropyl alcohol (IPA).
Storage and Handling
Store at 3-25C (37-77F). Do not freeze. Refrigeration is not required, but will extend shelf life. Allow 4 hours for solder paste to reach an operating temperature of 20-25C (68-77F) before use.
This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life.